INDUSTRY 04 - VESSELS & OFFSHORE STRUCTURES
MARINE & OFFSHORE SAFETY EQUIPMENT
Vessels, barges and offshore structures move constantly underfoot, which makes every loose cable, unsecured tool and open hatch a bigger hazard than it would be on solid ground. CableSafe keeps deck and platform work areas clear, so crew can move safely in a working environment that never stands still.
THE SITUATION ON SITE
On a vessel, barge or fixed offshore platform, deck space is fixed and every job competes for the same narrow walkways and stair towers. Welding leads, air hoses, ROV umbilicals and temporary lighting all have to cross those same routes, and unlike a land site there is nowhere to reroute a cable except overhead or through a hatch – both of which bring their own hazards.
Motion changes everything: a cable or hose that would simply be a trip hazard on land becomes far more dangerous on a moving deck, where a stumble is more likely to end in a fall over the side or into open machinery. The same applies to tools and hardware worked at height on a crane, mast or platform structure – a dropped item on a moving vessel is harder to predict and harder to avoid.
CableSafe supplies marine and offshore operators with a standard kit built for this environment: corrosion-resistant, non-conductive cable protection that keeps leads off the deck, drop-prevention nets and tool tethers for work at height, and quick-deploy barriers for hatches, manholes and other confined space entries below deck.
COMMON HAZARDS
Cable & hose runs across moving decks
Temporary leads crossing narrow deck walkways and stair towers are a serious trip hazard on a surface that is rarely still, with a fall risk that a land-based site doesn’t share.
Dropped objects over the side or below deck
Tools and hardware worked at height on masts, cranes and platform structures put crew below – and equipment on lower decks – at risk from a single dropped item.
Open hatches and unbarriered entries
Hatches, manholes and confined compartments below deck need controlled, barriered access; an unmarked opening on a working vessel is a fall hazard that’s easy to miss in low light or bad weather.
CABLESAFE SOLUTIONS
Sécurité des câbles
Route temporary leads off deck walkways with 3-channel cable guards for light runs and 5-channel cable guards for bundled leads, and lift crossings clear of trolley and vehicle traffic with a heavy-duty cable stand.
Prévention des chutes d'objets
Secure tools and hardware worked at height with a steel securing lanyard, catch what still gets dropped with a filet de sécurité antichute under masts and platforms, and close off gaps with a combi net around temporary structures.
Sécurité des espaces clos
Mark and barrier every open hatch with a manhole quick barrier, control below-deck access with a barrière d'accès aux regards, and cover open deck penetrations with a cover net until work is complete.
BUILT FOR A MOVING, SALT-EXPOSED ENVIRONMENT
Equipment used at sea has to survive salt spray, UV, humidity and constant vibration without corroding or losing grip. CableSafe’s marine-duty cable guards and barriers use corrosion-resistant, non-conductive materials chosen for exactly this exposure, not adapted from a land-based product line.
Because vessel schedules and offshore rotations leave little room for slow setup, everything in the range is designed to deploy and strike down quickly with a small crew, and to be re-used voyage after voyage rather than replaced after one trip.
WHY MARINE AND OFFSHORE HSE TEAMS SPECIFY CABLESAFE
Westmark B.V., the company behind CableSafe, has been supplying safety hardware to industrial and marine sites since 1991 – long enough to know that gear used at sea has to survive conditions a catalogue photo never shows.
Our cable guard and barrier ranges are built to the standards your safety officer already checks against: EN 1263-1 for netting systems, and the general secondary-retention and dropped-objects principles behind DROPS guidance for tools and equipment used at height.
Every product ships with the documentation your HSE file needs, and our team can spec a full kit list against your vessel or platform scope so nothing gets improvised on the day.
40+ YRS
supplying industrial safety hardware
3 AREAS
cable, dropped objects & confined space
UE + États-Unis
standards-aligned product range
1 DAY
typical dispatch from stock
FREQUENTLY ASKED QUESTIONS
SPECIFY ONCE, DEPLOY ON EVERY VESSEL OR PLATFORM
Talk to our team about a standard kit for your vessel or offshore structure – cable protection, drop prevention and confined space barriers specified for a marine environment.